Phone 03 980 2757

Reverse Osmosis

Filters

Filter Units

Accessories

The 5 Stage RO system is ideal for bore water, stream water and high sediment supplies. The system includes a pressure pump for low pressure supplies. 

* BRAND NEW - High Quality PRESTIGE RO System 
* 1 x Reverse Osmosis Unit 
* 1 x Stainless steel tank powder coasted. 
* Cartridges - 1 x 5 micron Sediment cartridge. 
1 x granular carbon filter 
1 x 5 micron carbon block 
* 1 x Genuine TFC MEMBRANE simply the best membrane available 
1 x Carbon post filter 
* 1 x touch flow faucet (tap) 

All hoses and fittings designed for easy connection. 
* Instructions - Designed for easy installation and cartridge change outs. 

The system is rated at 180 litres per day, however this depends on the setup and incoming water quality. 

An ideal filter cartridge for your standard 10 inch filterhousing if you want a sediment filter that can be washed and reused. 
Size 250mm long, 70mm dia. 
Micron ratings available between 5-50 microns (20 micron standard) 
High dirt loading. 
High flow rate. 
Wash out up to 20 times before replacement. 

An ideal water filter cartridge for your Jumbo 10 inch filter housing if you want a sediment filter that can be washed and reused. 
Micron ratings available between 5-50 microns (20 micron standard) 
High capacity.High dirt loading. 
High flow rate. 
Wash out up to 20 times before replacement. 

This cartridge gives you removal of course and fine sediment to dramatically improve your water quality. 
Ideal for rainwater artesian water and general sediment removal this cartridge fits big blue and big white housings and is normally placed after the pump or water tank, or just before the water pipe enters the house. 
Dimensions: 250mm X115mm 
Rated at 20 micron

Standard slimline 10 inch polyspun sediment cartridge 20 micron (5 micron also available). get the dirt and sediment out and save! 

Made in the USA. 
Dimensions: 250mm x 70mm 
An excellent general purpose 5 micron carbon block filter cartridge : 
*great chlorine removal 
*great for high or low pressure and locations 
*great value & long life 
An ideal all purpose cartridge for dirt, sediment, chlorine, organic chemicals. 

Made in the USA by Matrikx the Pb+1 is probably the bestcarbon block filter cartridge for broad spectrum removal including metals.Dimensions: 250mm x 70mm 
An excellent general purpose 0.5 micron carbon block filter cartridge : 
*metals removal ~ lead, aluminium, copper etc. 
*excellent Giardia and Cryptosporidium removal. This cartridge has been extensively tested and proven in the USA 
*great chlorine removal 
*best in high pressure and urban locations. 
*great value & long life 
An ideal all purpose cartridge for dirt, sediment, chlorine, organic chemicals. 

This is probably the best general purpose carbon block filter cartridge.
Dimensions: 250mm x 70mm 
*excellent Giardia and Cryptosporidium removal. This cartridge has been extensively tested and proven in the USA 
*great chlorine removal 
*best in high pressure and urban locations 
* long life 
An ideal all purpose cartridge for dirt, sediment, chlorine, organic chemicals.

This is a highly effective media which will strip all ions out of water leaving high purity water behind. It is ideal in combination with a carbon block filter in a multi stage system as this increases the cartridge life which is otherwise very short.

 Typical effective lifespan 600 litres

In twin system 2400 litres or 6 months

Fits 10 inch Jumbo Big White and Big Blue housings. Made in the USA, this is probably the best carbon block filter cartridge currently available in New Zealand. 
Dimensions: 250mm x 115mm 
An excellent general purpose 0.5 micron carbon block filter cartridge : 
*excellent Giardia and Cryptosporidium removal. This cartridge has been extensively tested and proven in the USA 
*great chlorine removal 
*best in high pressure and urban locations 
*great value & long life 
An ideal all purpose cartridge for dirt, sediment, chlorine, organic chemicals. 

This NZ30 cartridge replaces many commonbrands:- Taylors GAC / KDF 30/1, Microlene PC2HK-1, Mountain Fresh CI251, Spring Flow CTC -2HK, Omni Pure K5567. 
It can be used in place of Omnipure cartridges, Mountain Fresh, Microlene, Sapphire, Big Blue, Seal Brand, Aqua Filter, Aqua Pure, Aqua Cool, Spring Flow, Eagle Spring, Crystal Clear, Alpine Spring etc. 
Diameter: 62mm, length of body: 230mm 
Manufactured for NatureZone Water, this slim line cartridge is a high quality multi stage purification system, which removes a wide range of chemicals and heavy metals, while retaining the beneficial minerals in the water. 
The one micron mesh filter also removes very fine dirt and sediment and is effective at removing both Giardia and Cryptosporidium cysts. 
The cartridge has a bacteriostatic nature which will allow the cartridge to remain hygienic for up to 3 years. 
We recommend replacement of the cartridge every 24 to 30 months to maintain a high quality water supply. 
The cartridge comes complete with 'Quick fit' connecters and instructions to make installation onto normal water purifier tubing a breeze! 
Removes or reduces: Chlorine, Chemicals, Pesticides, PCBs from plastic pipes, dirt, sediment, rust, algae, asbestos, bad taste & odour heavy metals as well as Giardia and Cryptosporidium cysts. 

Granular coconut carbon. The NZ20 replaces most standard inline filter cartridges. 
Ideal for taste, odour, chlorine removal. It is recommended to replace these cartridges  every 12 months or when the taste of the water changes. 

NZ15 coconut shell carbon/KDF undersink filter by NatureZone Water. 
An ideal under sink filter cartridge, it gives you multi stage treatment to remove or reduce chlorine & pesticides, organic chemicals and metals such as lead, copper & aluminium. Great taste and odour removal. 
Normal filter cartridge life 12-18 months 
Ideal replacement for Taylors, Mountain Fresh, Alpine Spring, Sapphire, Microlene, Omnipure and many other inline filter brands. 

Granular coconut carbon. The NZ10 replaces most standard inline filter cartridges. Ideal for fridge filters.
Ideal for taste, odour, chlorine removal. It is recommended to replace these cartridges every 12 months or when the taste of the water changes. 

Deluxe bench top water filter with compression fittings on the divertor valve, inlet and spout fittings. 
High pressure housing with double o-rings for added security. 
This Counter top water filter unit comes with a 1.0 micron CB1 long life carbon block filter cartridge, and divertor valve tap fitting. 
1.0 micron carbon block filter removes or reduces chlorine, organic chemicals, pesticides, taste, odour. 
The divertor valve fits onto most standard older mixer taps and with the adaptor included you can fit to modern lever mixer taps. There is also an adaptor to allow you to fit the divertor to a single cold tap. 

Dual Stage Under Bench Filter System ~ Features dual o-ring high pressure housings. 
Complete kit with full installation instructions. Includes: 
Filter housings, cartridges, connection hose, shut off valve, mounting bracket, faucet set, housing spanner. 
20 micron sediment cartridge removes sediment, rust 
1.0 micron CB1 carbon block filter removes or reduces chlorine, organic chemicals, pesticides, taste, odour. 
Cartridge rated for Giardia and Cryptosporidium removal. 
Approved to standards: 
AS/NZS 3497, AS/NZS 4020, AS/NZS 4348 
~12 month manufacturers warranty~ 
These filter units are designed to connect to the cold inlet hose of a modern lever mixer tap. Other connections available for copper pipe, plastic pipe or dishwasher tap. 

Single Stage Under Bench Filter System ~ Features dual o-ring high pressure housings. 
Complete kit with full installation instructions. Includes: 
Filter housing, cartridge, connection hose, shut off valve, mounting bracket, faucet set, housing spanner. 
1.0 micron CB1 carbon block filter removes or reduces chlorine, organic chemicals, pesticides, taste, odour. 
Cartridge rated for Giardia and Cryptosporidium removal. 
Approved to standards: 
AS/NZS 3497, AS/NZS 4020, 
AS/NZS 4348 
~12 month manufacturers warranty~ 
These filter units are designed to connect to the cold inlet hose of a modern lever mixer tap. Other connections available for copper pipe, plastic pipe or dishwasher tap. 

One micron Giardia safe Carbon/KDF filter. 
An ideal under sink filter unit, this system gives you multi stage treatment to remove or reduce chlorine, pesticides, metals (aluminium, chromium, lead, mercury and others). Great taste and odour removal.  Includes cartridge, mounting bracket, tubing, push fit fittings, pressure reducing valve, standard faucet, water connection.
Normal filter life 18-24 months  Ideal replacement for Taylors, Mountain Fresh, Alpine Spring, Sapphire, Microlene, Omnipure and many other inline filter brands. 

NZ15 coconut shell carbon/KDF undersink filter by NatureZone Water. 
An ideal under sink filter unit, this system gives you multi stage treatment to remove or reduce chlorine & pesticides, organic chemicals and metals such as lead, copper & aluminium. Great taste and odour removal.  Includes cartridge, mounting bracket, tubing, push fit fittings, pressure reducing valve, standard faucet, water connection.
Normal filter cartridge life 12-18 months 
Ideal replacement for Taylors, Mountain Fresh, Alpine Spring, Sapphire, Microlene, Omnipure and many other inline filter brands. 

Choose from Classic, Platinum, Designer or Standard to fit the look and budget of the customer. The first three are quarter turn ceramic valve faucets. The Standard is a normal lever type water filter faucet

Ideal for installations where high water pressure is likely to be an issue. The pressure reducer comes with push fit fittings for use with ¼ inch tube. Highly recommended to be used when installing NZ20 and NZ30 filter cartridges. The inlet is ½ inch male thread with a 6mm tube adaptor. Ensure that water flow is in the direction of the arrow.

Top: ¾ inch thread fitting for dishwasher taps. It takes a ¼ inch John Guest fitting which connects to your water filter hose. It can be connected with an existing dishwasher or onto an unused tap and the end blanked.

Middle: Mixer tap fitting. This typically fits on the lower end of the braided stainless hose from a lever mixer tap. It has ½ inch thread fittings, a ball valve shut off and 6mm connector.

Bottom: G-Clamp saddle valve. This fits onto ½ inch and smaller copper and polybutylene pipe and punches a hole into the pipe. Generally can be easily installed without shutting off the water.

Ideal as a shut off between the water connection and the filter unit to make cartridge changing easier.

These are ¼ inch male threaded fittings that fit the standard filter housing and have push fit connectors for ¼ inch tube. Straight or 90 degree angle.

For connecting standard ¼ inch or 6mm tube. Straight or angle.

Fits the standard slimline white housing and the blue sediment filter housing. Mounting screws included.

For making up double units using white or ¾ blue housings.

For wall mounting these cartridges.

For wall mounting the smaller sealed cartridges.

3/8 soft tube for bench top filter units. Available by the metre.

 ADE external adaptor fits between single tap and divertor valve.

ADI internal adaptor fits between lever mixer tap and divertor valve.

Home

Coolers and Bottles

Filters and Parts

Contact us